Span America Bed Pendant Holder, Head and Foot Board Mount

The Savaria Bed Pendant Holder, Head and Foot Board Mount (manufacturer code Q6416LP) is a plastic holder that clips the bed hand pendant onto a head board or a foot board. Span-America lists it in the Rexx and Rexx Fast item-code table, and Savaria Patient Care carries it in the current beds and furniture range. Westin Healthcare supplies and fits Span bed parts in Brampton and across the Greater Toronto Area.

It is a small part that solves a daily problem. Without a fixed holder the hand pendant ends up under the mattress, wedged in a rail, or on the floor where a caster can run over the cable. This holder gives it one place to live.

Which beds this fits

Span-America prints Q6416LP in the item-code table of the Rexx and Rexx Fast brochure, described there as the plastic pendant holder for head and foot board mount. That family is the confirmed fit:

• Span Rexx and Rexx Fast beds: QD2000, QD2000Y, QD2250, QD2250Y, and the mobility, floor lock, and foot end control builds of each
• Any of those beds fitted with a head board or a foot board, because this is a board mount and it needs a panel to attach to

Savaria lists this code in the current beds and furniture range without a model restriction, which is why it also comes up for the Span Encore and Span Advantage families and for the 2026 Encore MC9 and Advantage ReadyWide MC7 beds. Span has not published a board-by-board fitment list for those beds, so we confirm the board profile with Savaria before we ship rather than assume it. Tell us the bed model and whether your boards are Standard Melamine or Elite HPL and we will check it in one call.

One thing worth knowing before you order. Span supplies a recessed pendant holder as standard with its rails, and that holder can face the pendant toward the user or toward the caregiver. If your rails already carry the pendant where you want it, you may not need this part at all. Order the board mount when you want the pendant on the head or foot board instead, or when the bed is used without the rail that carries the recessed holder.

If you want the pendant held out on an adjustable arm rather than flat against the board, look at the Savaria gooseneck pendant holder instead.

Savaria bed pendant holder specifications

Span-America publishes very little about this part beyond the item-code line, and we would rather print four confirmed facts than a dozen invented ones. The manufacturer describes Q6416LP as a plastic pendant holder that mounts to a head or foot board. It holds the bed hand pendant. It carries the Span bed accessory warranty term of one year. It is a passive part with no electrical connection, so nothing about it changes the bed's own ratings.

Clean it the way Span tells you to clean the bed. A damp cloth or sponge with warm water and a mild detergent, or a diluted neutral disinfectant, is what the owner manual asks for. Do not use solvents, alcohol, or petroleum products on the surface, and do not put the bed or its parts through a high pressure wash tunnel.

Why a fixed pendant holder matters

The Span owner manuals for the Encore and the Advantage ReadyWide both print the same two warnings, and they are the honest reason this part exists.

• Patients with diminished mental awareness should not be allowed access to the pendant, because they may become entangled in the cable
• Cables, including the power supply cord, must not be damaged by rolling the bed over them, and cords must not be left frayed or damaged

A holder does not replace a care plan. What it does is keep the pendant and its cable in a known place, off the floor and out of the caster path, so the staff routine of parking the control after every adjustment is easy to follow. Where a resident should not have access to the pendant at all, mount the holder on the foot board and use the foot end controller for staff adjustments.

Delivery and installation in Brampton and the GTA

Westin's own team delivers and fits Span bed parts across Brampton and the Greater Toronto Area. We have three stores in the Brampton and Toronto area if you would rather see a part first. To book a technician visit, call (905) 451-7743 or use the contact page.

This is a small carton. The Canada-wide free ground-shipping offer on smaller goods can apply when it ships on its own. If it travels with a bed, the bed is oversized and White-Glove Delivery is described on the shipping policy. Any charge is confirmed on your order.

Related products from Westin

Browse the rest of the range in hospital bed accessories and hospital beds. The beds this part is built around are the Span Rexx, the Span Advantage Q-Series, and the Span Encore package. For the adjustable-arm version of this holder, see the Savaria gooseneck pendant holder.

Service, repairs, and warranty

When something on the bed or an accessory needs work, you call the shop that supplied it, not a US parts desk. Westin Healthcare has a service and repairs department and our technicians come to the home or the workplace.

Span manufacturer warranty

Span Medical Products Canada warrants beds and bed accessories against defects in workmanship and materials under normal and proper use from the date of initial delivery. Bed accessories carry one year. Batteries, hand pendants, foot end controllers, and cables carry one year. Electrical components, meaning the control box and the actuators, carry five years. The frame and all welds on steel structural components carry fifteen years. The manufacturer warranty does not cover labour for service, and fitting parts from other manufacturers to a Span bed invalidates it. We handle the claim with you.

Frequently asked questions

What is the manufacturer code?

Q6416LP. Span-America describes it as the plastic pendant holder for head and foot board mount. Savaria lists it as the pendant holder, head and foot board mount.

Which beds does it fit?

Span prints this code against the Rexx and Rexx Fast family, so that fit is confirmed. Savaria carries it in the wider beds and furniture range, so it is also ordered for Advantage and Encore beds. Because Span has not published a board-by-board list for those, we confirm your board profile before shipping. Tell us the bed model when you order.

Does my bed need a head board or a foot board?

Yes. This is a board mount and it needs a panel to attach to. Span builds its beds with permanent or removable end panels, so if your bed was ordered without boards this holder has nothing to clamp to.

Does a Span bed already come with a pendant holder?

Span supplies a recessed pendant holder as standard with its rails, and that holder can face the pendant toward the user or toward the caregiver. This board mount is an addition for when you want the pendant on the head or foot board instead.

How is this different from the gooseneck holder?

The gooseneck version, Q6417LP, puts the pendant on a bendable arm off the board so it can be positioned closer to the person's hand. Q6416LP is the plain plastic holder that sits against the board. Both are board mounts.

Can I install it myself?

Span's manuals ask you to follow the manufacturer instructions when mounting any accessory to the bed. If you would rather not, our technicians fit it during a scheduled visit across Brampton and the GTA.

How do I clean it?

The same way Span asks you to clean the bed. A damp cloth or sponge, warm water with a mild detergent or a diluted neutral disinfectant, and no solvents, alcohol, or petroleum products. Do not pressure wash it.

What is the warranty?

One year, the Span bed accessory term. Labour for service is not part of the manufacturer warranty. Our service department handles the claim with you.