Skip to Content
Skip to main content
Funding is available. We are an ADP, ODSP, WSIB, March of Dimes, VA and IFHP authorized vendor. See if you qualify
Funding available - see if you qualify
Canadian owned and operated since 2012 Unit 7, 15 Fisherman Drive, Brampton, Ontario

Span America Advantage Bed Battery Backup QD1000 T-Motion, Factory Installed

(0 review)

The Span America Advantage Bed Battery Backup QD1000 T-Motion, Factory Installed (Q6680) is Span's emergency backup battery option for the Advantage QD1000 bed on T-motion controls, built in at the factory before the bed ships. Westin Healthcare specifies and supplies Span beds in Brampton and across the GTA.

Manufacturer codeInstallPlatformBatteryWarranty
Q6680Factory, with a new bedAdvantage QD1000, T-motionLead acid, 24 VDC output1 year

What does it fit? Span Advantage QD1000 and QD1000Y beds on T-motion (TiMOTION) controls. It is not the part for a Span Encore MC9 or an Advantage ReadyWide MC7 Standard on TiMOTION controls (Q6701 factory, Q6700 field), and not for a ReadyWide Plus MC7WP on LINAK controls (Q6770 factory, Q6769 field). The matching field install code is Q6682.

289.00 289.00

  • Brand
Delivery and Setup Delivery and setup across Brampton and the GTA. Call (905) 451-7743
Safe Checkout VISA Visa or Mastercard online, or pay in store when you visit us.
Tax No Tax
SKU Q6680
Category Bed Accessories

Description

The Span America Advantage Bed Battery Backup QD1000 T-Motion, Factory Installed (manufacturer code Q6680) is Span's emergency backup battery option for the Advantage QD1000 bed built on T-motion controls. The Advantage owner manual describes it as an optional internal or external battery backup, for use when there is a power outage or when the bed needs to be operated where there is no power source nearby. Westin Healthcare specifies, supplies and services Span beds in Brampton and across the Greater Toronto Area.

This is the factory code. It goes on a new bed order, so the battery arrives already fitted, wired to the control box and tested with the bed. To add a backup battery to an Advantage that is already in a room, order the field install kit instead, Q6682.

Which beds this fits

Read this before you order. Savaria supplies a different battery backup code for each bed platform and control system, and they are not interchangeable. This page is Q6680.

Bed platform and control systemField installFactory install
Span Encore MC9 and Advantage ReadyWide MC7 Standard, TiMOTION controlsQ6700Q6701
Span Advantage ReadyWide Plus MC7WP, LINAK controlsQ6769Q6770
Span Advantage QD1000, T-motion controlsQ6682Q6680

The bed and control box labels identify the platform and the control system. If you cannot find them, call (905) 451-7743 with the model and serial number from the bed label and we will identify it before anything is ordered. One quick tell in the room: the Advantage QD1000 has no SmartStop. If the bed pauses on the way down and warns you before it reaches its lowest position, you are looking at a ReadyWide or an Encore, and those take different battery codes. On our own shelf the platforms are the Span Advantage Q-Series, the Span Encore and the Span Rexx.

Why a bed needs a backup battery

A full electric low bed does everything through its actuators. In a power cut, a bed without a battery is frozen at whatever height and deck angle it happened to be at. That is a problem in three ordinary situations, and none of them is rare in Ontario.

  • A resident is in a raised or Comfort Chair position when the power goes and needs to be brought flat and low
  • A caregiver needs the bed at working height to reposition someone safely, rather than bending over a bed stuck at 8 inches
  • The bed has to be moved to another room and there is no outlet on the way

Span's own wording is the plainest version of it: the backup battery "is for use when there is a power outage, or the bed needs to be operated where there is no power source nearby". The Advantage keeps its full travel of 7-7/8 inches to 30 inches, its 0 to 70 degree back deck and its 0 to 30 degree knee deck, and those functions are what the battery keeps available.

Living with the battery

It is a lead acid pack that charges through the bed's own control box. Span is specific that the battery should always stay plugged into the control box, and that the control box has to be connected to AC power for charging to happen. An LED on the battery shows the charge status.

Span asks for a full continuous charge of at least 24 hours in three situations: the first time it is used, before a long period in storage or unplugged, and after that period. Putting a bed away for the summer with the battery flat is the one habit that shortens a pack's life, and it is the one worth training out.

The pack is replaceable, and Span states plainly that it must be replaced only with a battery provided by Span Medical Products Canada. Our service and repairs department orders the right pack and fits it.

Span America backup battery specifications

These values come from the Span Advantage owner manual for this exact platform and from the Savaria 2026 product range. Nothing is claimed for this code that Span does not print.

SpecificationValue
BrandSpan America (Savaria Patient Care)
Manufacturer CodeQ6680
TypeEmergency backup battery option for a Span bed
InstallationFactory installed, built into the bed and tested before it ships
Compatible BedsSpan Advantage QD1000 and QD1000Y series built on T-motion (TiMOTION) controls
Matching Field Install CodeQ6682
Not ForSpan Encore MC9 or Advantage ReadyWide MC7 Standard on TiMOTION controls (Q6701 factory, Q6700 field); Advantage ReadyWide Plus MC7WP on LINAK controls (Q6770 factory, Q6769 field)
Codes On The Other Span PlatformsEncore MC9 and ReadyWide MC7 Standard: Q6701 factory, Q6700 field. ReadyWide Plus MC7WP LINAK: Q6770 factory, Q6769 field. Advantage QD1000 T-motion: Q6680 factory, Q6682 field
Battery TypeLead acid, per the Advantage owner manual
Battery Pack24 V DC emergency power backup battery pack, listed as optional in the Advantage specification table
Input Voltage30 VDC (29 VDC minimum, 45 VDC maximum)
Output Voltage24 VDC
Duty Cycle10 percent, maximum 2 minutes on and 18 minutes off, the same duty cycle as the bed
MountingInternal or external, per the Advantage owner manual
ChargingCharges through the bed's control box while the control box is connected to AC power. Span states the battery should always stay plugged into the control box
Charge IndicatorAn LED on the battery shows charge status
ReplacementThe backup battery is replaceable. Span states it must be replaced only with a battery provided by Span Medical Products Canada
Warranty1 year, Span batteries; labour not included

Span does not publish the capacity in amp hours, the number of cycles the bed will run on one charge, the pack weight or its physical dimensions, and we will not invent them. If your specification needs a runtime figure, call (905) 451-7743 and we will get the current answer from Savaria in writing before the order goes out.

Delivery and setup in Brampton and the GTA

Westin Healthcare's own team delivers and sets up Span beds across Brampton and the Greater Toronto Area. We bring the bed in, assemble it, and show you the hand pendant and the foot end controller before we leave. We have three stores in the Brampton and Toronto area if you would rather see a bed first. Call (905) 451-7743 or use the contact page to book a date.

Hospital beds and bed hardware are oversized, so the Canada-wide free ground-shipping offer on smaller goods does not apply to them. Inside Toronto and the GTA, White-Glove Delivery is described on the shipping policy. If the order is going outside the GTA, ask us for a freight quote. Any charge is confirmed on your order.

Related products from Westin

Browse the range in hospital bed accessories and hospital beds. The Span beds this option belongs to are the Span Advantage Q-Series, the Span Encore package and the Span Rexx, and the full range sits under long term care beds. Related Span bed hardware we supply includes bed rails, the Span transport dolly and the Span premium overbed table, and the surfaces that go on these beds are in medical mattresses.

Service, repairs, and warranty

When something on the bed or an accessory needs work, you call the shop that supplied it, not a US parts desk. Westin Healthcare has a service and repairs department and our technicians come to the home or the workplace.

Span America manufacturer warranty

Span Medical Products Canada warrants beds and accessories against defects in workmanship and materials under normal and proper use from the date of initial delivery. Batteries, hand pendants, foot end controllers and cables carry one year, bed accessories carry one year, and parts subject to wear carry one year. Electrical components, which Span defines as the control box and the actuators, carry five years. The frame and all welds on steel structural components carry fifteen years. Labour for service is not covered by the manufacturer warranty, and warranty claims run through a Span RMA number. We handle the claim with you.

Frequently asked questions

What is the manufacturer code?

Q6680. The 2026 Savaria range prints it as "Battery and backup option, T-motion ADVANTAGE, FACTORY INSTALL". Quote the code and the bed platform together and the order desk cannot pick the wrong one.

Should I order factory or field?

Factory if the bed has not been built yet, because it arrives fitted, wired and tested with the bed. Field if the bed is already in a room, because a technician fits the kit there. Savaria offers the backup battery both ways on this platform: Q6680 for factory and Q6682 for field.

Will this fit any Span bed?

No. This code is for the Advantage QD1000 built on T-motion controls. A Span Encore MC9 or an Advantage ReadyWide MC7 Standard on TiMOTION controls takes Q6701 or Q6700, and a ReadyWide Plus MC7WP on LINAK controls takes Q6770 or Q6769. The table above lists them all.

How long will the bed run on the battery?

Span does not publish a runtime or a capacity figure for the pack, so we do not quote one. What Span does publish is the duty cycle, which is the same as the bed's: 10 percent, a maximum of 2 minutes on and 18 minutes off. A bed motor is not meant to run continuously on mains power either. If your specification needs a runtime number, ask us and we will get it from Savaria in writing.

Does the battery need its own outlet?

No. It charges through the bed's control box while the control box is plugged into the wall. Span asks that the battery stay plugged into the control box at all times.

How do I keep the battery healthy?

Leave it plugged into the control box and leave the bed plugged in. Span asks for a continuous charge of at least 24 hours the first time it is used, before a long period of storage or with the bed unplugged, and again after that period. The LED on the battery shows charge status.

Can I fit any replacement battery?

No. Span states the backup battery must be replaced only with a battery provided by Span Medical Products Canada. Our service and repairs department orders the right pack and fits it.

What is the warranty?

One year. Span puts batteries, hand pendants, foot end controllers and cables in its one year row rather than in the five year electrical components row, which covers the control box and the actuators. Labour for service is not part of the manufacturer warranty. We handle the claim with you.

Specifications

Warranty 1 year, Span batteries; labour not included
Input Voltage 30 VDC (29 VDC minimum, 45 VDC maximum)
Battery Type Lead acid, per the Advantage owner manual
Installation Factory installed, built into the bed and tested before it ships
Mounting Internal or external, per the Advantage owner manual
Duty Cycle 10 percent, maximum 2 minutes on and 18 minutes off, the same duty cycle as the bed
Charging Charges through the bed's control box while the control box is connected to AC power. Span states the battery should always stay plugged into the control box
Manufacturer Code Q6680
Output Voltage 24 VDC
Compatible Beds Span Advantage QD1000 and QD1000Y series built on T-motion (TiMOTION) controls
Not For Span Encore MC9 or Advantage ReadyWide MC7 Standard on TiMOTION (Q6701 factory, Q6700 field); ReadyWide Plus MC7WP on LINAK (Q6770 factory, Q6769 field)
Charge Indicator An LED on the battery shows charge status
Codes On The Other Span Platforms Encore MC9 and ReadyWide MC7 Standard: Q6701 factory, Q6700 field. ReadyWide Plus MC7WP LINAK: Q6770 factory, Q6769 field
Matching Field Install Code Q6682
Battery Pack 24 V DC emergency power backup battery pack, listed as optional in the Advantage specification table
Replacement The backup battery is replaceable. Span states it must be replaced only with a battery provided by Span Medical Products Canada
Type Emergency backup battery option for a Span bed

Documents

Shipping and Delivery

We deliver and set up equipment across Brampton and the Greater Toronto Area. Our team brings the equipment in, sets it up and shows you how to use it.

Planning a rental? Rental equipment is delivered and picked up by our team within the same service area. Learn about rentals.

To schedule a delivery or ask about timing, call us at (905) 451-7743.

Questions about this product?

Talk to a local specialist today. We will help you find the right equipment and the funding to cover it.