Description
What is the Satin Air alternating pressure mattress?
It is a 5 inch air mattress system, 17 cells in all, sitting on a 3 in foam base and driven by a pump that alternates the cells so no one area of skin carries the load for long. It is meant for people at risk of pressure injuries, or already healing from them, on a standard 36 x 80 in bed.
Who is it for?
It suits clients who spend most of the day in bed and cannot reposition on their own: home care clients, residents in long-term care and patients in clinics. It carries up to 350 lb (159 kg). A care team should still assess skin and risk, and the mattress supports that care rather than replacing turning schedules your nurse or therapist sets.
How does it work?
The pump inflates and deflates alternate air cells in a cycle, which shifts pressure points. A dial sets the pressure to the user's weight, and a static mode holds the cells firm when you need a steady surface, for example for transfers or personal care. A low pressure alarm warns the caregiver if air is lost. If the power fails, the 3 in foam base keeps the person from bottoming out onto the bed deck.
A CPR quick-deflate valve lets staff flatten the mattress fast in an emergency, and a transport cap seals the air line when the mattress is moved.
Specifications
| Item Number | MER-SAPM53 |
|---|---|
| Construction | 17 air cells, 5 in high, over a 3 in foam base |
| Size | 80 x 36 x 8 in (203 x 91 x 20 cm) |
| Weight Capacity | 350 lb (159 kg) |
| Pump | Alternating and static modes, weight-setting dial, low pressure alarm |
| Cover | Nylon, zippered, fluid-resistant, vapour permeable |
Setting up and cleaning
Place the mattress on the bed deck, connect the air line to the pump, hang the pump on the footboard, set the weight dial and check that the cells fill before the client lies down. The fluid-resistant cover can be wiped between users or after spills, following your facility's cleaning policy.
Choosing a bed to go with it
The mattress fits a standard 36 x 80 in frame. Browse our hospital beds, add bed rails where they are needed, or see patient lifts for transfers. Our team can help you match the surface to your care plan: contact us, check funding and read our warranty terms.
Frequently asked questions
Will it fit my bed?
It fits a standard 36 x 80 in hospital or home care bed frame. Some listings give the width as 35 in, so measure your deck if the fit is tight.
What happens during a power cut?
The air cells slowly lose pressure, and the 3 in foam base underneath keeps the person supported instead of resting on the deck.
How is it different from a foam mattress?
A foam mattress is passive. This one moves pressure around with its pump, which is why it is used where skin breakdown is a concern.
Is the pump included?
Yes, the pump comes with the mattress system.
Can it be set to a fixed, non-alternating surface?
Yes, the pump has both alternating and static modes.
Specifications
| Brands | Satin Air |
|---|---|
| Weight Capacity | 350 lb (159 kg) |
| Construction | 17 air cells, 5 in, over 3 in foam base that prevents bottoming out in a power loss |
| Cover | Nylon zippered, fluid-resistant, vapour permeable |
| Size | 80 x 36 x 8 in (203 x 91 x 20 cm), some listings say 35 in wide |
| Item Number | MER-SAPM53 |
| Pump | Alternating and static modes, weight-setting dial, low pressure alarm (8 to 9 LPM by listing) |
| Type | Alternating pressure and low air loss mattress system with pump |
Documents
- All Forms and Documents Every form, brochure and document in one place.
Shipping and Delivery
We deliver and set up equipment across Brampton and the Greater Toronto Area. Our team brings the equipment in, sets it up and shows you how to use it.
Planning a rental? Rental equipment is delivered and picked up by our team within the same service area. Learn about rentals.
To schedule a delivery or ask about timing, call us at (905) 451-7743.
Questions about this product?
Talk to a local specialist today. We will help you find the right equipment and the funding to cover it.